The best way to determine if your computer or SOHO router has been affected by DNSChanger is to have them evaluated by a computer professional. However, the following steps can help you gather information before consulting a computer professional.
To determine if a computer is using rogue DNS servers, it is necessary to check the DNS server settings on the computer. If the computer is connected to a wireless access point or router, the settings on those devices should be checked as well.
Checking the Computer:
If you are using a Windows computer, open a command prompt. This can be done by selecting Run from the Start Menu and entering cmd.exe or starting the command prompt application, typically located in the Accessories folder within Programs on your Start Menu, as shown below:
Click on the connection that is active. This will bring up the Network Connection Status screen. Click on Support and then Details. Check for the values that correspond to the DNS servers.
The Apple Network pane will show a number of possible connections on the left side. Choose the one that is active for you and click on the Advanced button in the right lower corner. Then choose DNS from the options to show the DNS servers you are using.
Compare whether your computer has DNS servers listed in the number ranges listed below.
If your computer is configured to use one or more of the rogue DNS servers, it may be infected with DNSChanger malware.
Home computers with high-speed Internet connections and office computers typically obtain their IP settings via DHCP from a device on the network. In these cases, the computers are provided with an IP address, default gateway, and DNS server settings. The IP addresses usually fall into one of three ranges of private addresses—192.168.0.0 to 192.168.255.255; 172.16.0.0 to 172.31.255.255; and 10.0.0.0 to 10.255.255.255. In most homes, computers are assigned an IP address in the range 192.168.1.2 to 192.168.1.254, and the default gateway and DNS servers are set to 192.168.1.1. To determine if your computer is utilizing the rogue DNS servers, read the next section, Checking the Router.
If you are unable to locate your DNS server settings, obtain assistance from the Help program bundled with your operating system, reputable online sources, or a trusted professional.
Checking the Router
Small office/home office routers connect your network of computers and devices to your Internet service provider. The SOHO router may have been purchased and installed by you or installed by your ISP. Linksys, D-Link, Netgear, and Cisco are common SOHO router brands, but there are many others.
The DNSChanger malware is capable of changing the DNS server settings within SOHO routers that have the default username and password provided by the manufacturer. If you did not change the default password at the time the SOHO router was installed, you must check the SOHO router settings.
The procedure to access your SOHO router setting varies by manufacturer, so consult your product documentation. Once you have access to the SOHO router configuration, compare the DNS servers listed to those in the rogue DNS servers table above. If your SOHO router is configured to use one or more of the rogue DNS servers, a computer on your network may be infected with DNSChanger malware.
What Should I Do?
In addition to directing your computer to utilize rogue DNS servers, the DNSChanger malware may have prevented your computer from obtaining operating system and anti-malware updates, both critical to protecting your computer from online threats. This behavior increases the likelihood of your computer being infected by additional malware. The criminals who conspired to infect computers with this malware utilized various methods to spread the infections. At this time, there is no single patch or fix that can be downloaded and installed to remove this malware. Individuals who believe their computer may be infected should consult a computer professional.
Individuals who do not have a recent back-up of their important documents, photos, music, and other files should complete a back-up before attempting to clean the malware or utilize the restore procedures that may have been packaged with your computer.
Information regarding malicious software removal can be found at the website of the United States Computer Emergency Readiness Team: https://www.us-cert.gov/reading_room/trojan-recovery.pdf.
Source :
0 comments:
Post a Comment